|
|
Post by cyaneyes on Mar 3, 2011 22:04:11 GMT -5
I am wondering if anybody has widened the rear axles so the tires are more even with body.the centerlines on my rims can't be moved in so tires are tucked under body by about three inches wanted to try and move them out.any ideas?
|
|
|
|
Post by jspbtown on Mar 3, 2011 22:34:08 GMT -5
widening the rear axles would not be enough. You would need wider trailing arms. They would probably cost more than a new set of rims.
Maybe some wider tires and spacers?
|
|
|
|
Post by mj on Mar 4, 2011 10:17:33 GMT -5
You can take a couple approaches. 3/8" wheel spacers, or new wheels (and probably tires) with the proper offset. I think 3 1/2" offset on the rear with wide tires will do the trick. Can post pictures of mine if you like.
|
|
stevevw
Full Member
Part VW part Porsche , all Bradley
Posts: 117
|
Post by stevevw on Mar 6, 2011 0:50:46 GMT -5
If you have an IRS setup you can use Porsche 944 trailing arms for I think it about 3 inch wider track . Then you will have a Porsche bolt pattern . That is what I run on my twoie with cookie cutters .
See ya ,Steve
|
|
