scottd
Junior Member
Posts: 76
|
Post by scottd on Feb 24, 2011 23:01:22 GMT -5
About to install my new engine tomorrow and was wondering what the clutch disk thickness is supposed to be. I know my disk is used, but Id like to salvage as much as possible (seeing how I just had to buy another engine!)
|
|
|
|
Post by thehag71 on Feb 25, 2011 4:48:43 GMT -5
According to the Clymer VW Beetle shop manual for 1961-1979, the thickness of the disc should be at least 0.36 in.
|
|
|
|
Post by Tony O. on Feb 25, 2011 7:09:34 GMT -5
Scott,
The minimum thickness above the rivet heads on the clutch friction disk should be 1/16".
Another easy check is to try and slip a 7mm open end wrench over the edge of the disc. If it slips over easily the disc should be replaced.
Tony O.
|
|
scottd
Junior Member
Posts: 76
|
Post by scottd on Feb 25, 2011 13:09:21 GMT -5
To be on the safe side, I went out and got a new clutch set today....
Brand new disk is only .325....
the one that came out is .325.......
This is screwey.
|
|
