|
Post by pushnfords on Jan 29, 2011 17:50:29 GMT -5
I'm working on assembling the front beam and I can't find the large washers for the upper ball joint anywhere. They have to be fairly big to keep the nut from slipping in the camber adjuster hole in the spindle but I don't know what OD or thickness. A friend helped take apart the front suspension so I don't think I even saw them to know what I'm looking for. Does anyone have one laying around they could measure for me?
Thanks!
Derek
|
|
|
Post by don29163 on Jan 29, 2011 21:31:16 GMT -5
|
|
|
Post by pushnfords on Jan 29, 2011 22:08:56 GMT -5
Thanks! I think I got something that will work. One benefit of working at a John Deere dealer I guess...I ran into work to get some 12MM lock washers for the front beam to pan bolts and looked through the washers there. I found one that was approx 1.3" OD and .197" thick if I remember correctly...and hardened...so I think they'll work. I'm converting to disc brakes front and rear and I took a load of old/stock parts to my in law's farm for storage and I bet the washers went along for the ride.
|
|