|
|
Post by pulso57 on Aug 19, 2010 19:53:51 GMT -5
This is the Bradley GT2 Propane Conversion  Let me know what you think. Jerry |
|
|
|
Post by skip20 on Aug 20, 2010 5:17:14 GMT -5
Good picture, but I have no idea as to what I'm looking at.
If you could label the parts in the picture & what they do , cost & were the tank is.
|
|
|
|
Post by pulso57 on Aug 20, 2010 8:04:57 GMT -5
First picture you are looking at the propane mixer/carb. The 2 round units on the left ,one is a vaporizer/regulator and the one on the right is the vacuum lock off,this unit has a vacuum line to the mixer.'No vacuum no gas flow,this is for safety,in case an accident or rupture This is the side going into the modified gasoline carb,i designed this engine to be dual use.  |
|
|
|
Post by pulso57 on Aug 20, 2010 8:10:15 GMT -5
This is the location of the propane tank in the rear deck of the Bradley,i lower the tank into the deck, so its in place and wont move around. Yes its a BBQ tank,inexpensive and easy to refill. Also i can run this Bradley on gasoline, Vapor propane like a BBQ as well as liquid propane like a forklift.   |
|
|
|
Post by skip20 on Aug 20, 2010 8:22:26 GMT -5
This is COOL!  |
|
|
|
Post by bradgt on Aug 20, 2010 8:53:14 GMT -5
How far can you go on one tank?
|
|
|
|
Post by bobevans on Aug 20, 2010 9:22:21 GMT -5
To the MOON if it leaks....  |
|
|
|
Post by pulso57 on Aug 20, 2010 9:23:20 GMT -5
5 gallon tank on vapor 110 miles
forklift dot tank on liquid 240 miles
jm
|
|
|
|
Post by pulso57 on Aug 20, 2010 9:45:30 GMT -5
Bob, I'm in the process of installing a volume flow preventer and additional solenoid shut off from the tank,not to worry about leaks. If it does the check valve inside the flow valve shuts off. Also the system is "negative.08 WC" that means that there is no way you can drawn propane unless the engine is on,and creating a vacuum. Even if the hose to the Mixer is cut. This is the same principal as in millions of forklift used in commercial establishments. "safety is always an issue, when considering the unusual" This picture shows the vaporizer on the left with the primer button,vacuum cut off unit and small hose for vac take off, the vapor out and the hoses for the heating of the vaporizer  Jerry |
|
|
|
Post by don29163 on Aug 20, 2010 22:33:39 GMT -5
Amazing and very neat looking work. I'd like to see pics of the rest of the car as well
|
|
|
|
Post by pulso57 on Aug 21, 2010 10:37:28 GMT -5
|
|
