|
|
Post by robstone on Jun 27, 2009 16:35:12 GMT -5
Here are a few pics and vids for the new site:   Click on box:  Click on box:  Worked on rear roll bar today. Click on box:  |
|
|
|
Post by mrbigh2 on Jun 27, 2009 20:40:37 GMT -5
And the project continues.... I was kind of missing your videos Rob....
|
|
|
|
Post by robstone on Jun 28, 2009 1:04:32 GMT -5
I found a weld shop that is open on the weekend today! Had plenty of metal available at reasonable price so I did a little work on the beast.  |
|
|
|
Post by Jeff Troy on Jun 28, 2009 11:05:07 GMT -5
HI, Rob,
Good to see your progressions once again.
Great creativity and energy -- and a great job!
Warmest.
|
|
|
|
Post by robstone on Jun 28, 2009 16:06:03 GMT -5
Thanks guys! Here is another video. Click on box:  |
|
|
|
Post by robstone on Jul 19, 2009 20:21:44 GMT -5
Worked on the rear roll bar today. Cut openings in the bottom of the body so the roll bar will contact the chassis directly. That steel will be fastened to the body inside that bulkhead so when the body comes off again so will the roll bar once everything is unbolted.  Started on the top section of the roll bar too. Got one piece tacked on.  Started kerfing a bend for the passenger side top bend. Will weld and grind it all smooth.   Mashed my finger real good too! Had a saw kick back and mash my finger into the roll bar as I was trimming some fiberglass off of the body. |
|
|
|
Post by mrbigh on Jul 19, 2009 20:27:41 GMT -5
How come, no picture of the finger?
|
|
|
|
Post by robstone on Jul 19, 2009 20:47:41 GMT -5
|
|
|
|
Post by mrbigh on Jul 19, 2009 21:07:13 GMT -5
Ouch!!,  that looks ugly and painful............. |
|
|
|
Post by dawgdk on Jul 20, 2009 9:26:49 GMT -5
There goes that nail!!!!  |
|
that looks ugly and painful.............