|
|
Post by leonardabell on May 17, 2022 13:02:02 GMT -5
I thought that the seat just ran off of the track going forward, but I seem to have hit a stop. How in the blazes do the seats come out of the bradley?
|
|
|
|
Post by Gary Hammond on May 17, 2022 16:33:11 GMT -5
Hi Leonard,  The fiberglass seat shells bolt to the adjusting rails. You have to remove the upholstery from the seat shell for access to the bolts. The rails are bolted through the floor pan. Gary Hammond,   |
|
|
|
Post by leonardabell on May 18, 2022 20:56:14 GMT -5
That makes sense. Thanks for the advice.
|
|
|
|
Post by leonardabell on May 19, 2022 18:52:11 GMT -5
I got the old seats out and the new ones were too wide for the outside shelf. I raised the sliders up a little over a quarter inch and it now clears the shelf. This is on the drivers side. The passenger side is no longer a slider and positioned all the way back. I ran out of washers to shim it up. Don't know how to post pictures on this site.
|
|
|
|
Post by superdave008 on Jan 7, 2023 17:04:45 GMT -5
Hi buddy enjoy your posts... would like to know how to post pictures too.
|
|
