|
|
Post by vinman on Aug 26, 2016 17:07:23 GMT -5
There were no brake calipers installed on my GT II when i got it. I have discovered that the Karmann Ghia calipers line up perfectly. The master cylinder ports for the front brakes are capped off. Can someone tell me what size (diameter) brake line I need to get (and proper thread size for the nut) as well as what type of flare I should use? Bubble, Double or Single?
Thanks
|
|
|
|
Post by jspbtown on Aug 27, 2016 8:16:59 GMT -5
Its a bubble flare. I believe the nut size is 10mm x 1.0.
Your local NAPA has these in stock, pre=made correctly, in a variety of lengths. I strongly suggest you go that route.
|
|
|
|
Post by vinman on Aug 27, 2016 11:46:57 GMT -5
Its a bubble flare. I believe the nut size is 10mm x 1.0. Your local NAPA has these in stock, pre=made correctly, in a variety of lengths. I strongly suggest you go that route. Thanks. I took the advice and got one pre-done from the autoparts store. My kids got me this for Father's day, and I'm dying to try it, but not yet.  Flaring Tool |
|
|
|
Post by vinman on Aug 28, 2016 19:07:04 GMT -5
I got the new calipers installed on the front and new brake lines and hoses. Thanks.
|
|
