|
|
Post by superdave008 on Sept 3, 2015 22:10:42 GMT -5
I'm starting to paint my Bradley gt and wondered what the best way to prep the surface would be.
|
|
|
|
Post by jspbtown on Sept 3, 2015 22:39:45 GMT -5
A thorough sanding with 80 grit on a DA sander followed by several coats of hi build polyester primer. Guide coat and block. Sealer then paint.
|
|
|
|
Post by aircooled1 on Sept 13, 2015 23:28:26 GMT -5
I would certainly start buy removing any and all parts or taping off well so you don't scratch those parts not wanting marred then as mentioned a good 80 grit DA paper and DA sander then if going to gel coat and do fiber repairs I'd use ever coat brand materials its a ton sanding blocking building in layers then I would move on to a Quality High build Primer block sand and guide coat to find your low spots I'd say 4 sessions and then get it dialed in then reprime with a good quality primer block sand again then use a sealer and Spray time assuming your using newer style materials not Laqurer or Enamel style paints.
|
|
