dand
New Member
Posts: 20 
|
Post by dand on Aug 10, 2015 18:18:14 GMT -5
I am in need of a small section of fiberglass body passenger side panel under bumper and slightly into quarter panel. Let me know if you have a bad body where part could be salvaged.
|
|
dand
New Member
Posts: 20
|
Post by dand on Aug 19, 2015 21:07:57 GMT -5
nobody out there have a wrecked gt2 body with a usable rear quarter? more specifically what I am interested in is rear valence section from centerline below bumbper on passemger side. previous owner cut body panel for muffler tailpipe exit and does not look good.
|
|
|
|
Post by skip20 on Aug 20, 2015 4:37:28 GMT -5
nobody out there have a wrecked gt2 body with a usable rear quarter? more specifically what I am interested in is rear valence section from centerline below bumbper on passemger side. previous owner cut body panel for muffler tailpipe exit and does not look good. I have the whole body for $150.00 865-966-7929 Skip20 |
|
dand
New Member
Posts: 20
|
Post by dand on Aug 22, 2015 9:53:14 GMT -5
skip20, thanks for offer and price for whole gt2 body seems more than reasonable. my gt2 body is now really good and nearly ready for primer but have that small section to repair. I guess I will need to just glass in a small section if I can't patch in a replacement section. thanks again but whole body wont work. dand
|
|
dand
New Member
Posts: 20
|
Post by dand on Sept 5, 2015 18:18:22 GMT -5
Still in need of small piece of fiberglass body panel anyone have small section as described below
|
|
dand
New Member
Posts: 20
|
Post by dand on Dec 15, 2015 19:06:45 GMT -5
repostinhg to check availability
I am in need of a small section of fiberglass body passenger side panel under bumper and slightly into quarter panel. Let me know if you have a bad body where part could be salvaged.
|
|
|
|
Post by Rb20drifter07 on Dec 16, 2015 20:58:06 GMT -5
Hey I got access to two what I believe are Bradley gt2s they are about 1 1/2 to 2 hours away from me but I may be able to get that piece u need. I'm new to these cars but knew someone would be looking for parts so text me I snapped a few quick pics of them. Mostly just a shell. But maybe a few good parts. Lmk what u need send pic or lmk what's rare or hard to find I'll grab as much as I can off them before they are gone. 570-591-3185 I'm on the east coast. PA to be exact so please keep in mind of time diffrence when texting me. Thanks
|
|
dand
New Member
Posts: 20
|
Post by dand on Jan 23, 2016 15:37:36 GMT -5
ALL, I am still looking for someone with a damaged Gt2 body to secure a small body patch panel. The panel section needed is passenger side from centerline of car at rear bumper line down and around the passenger side rear quarter same dimension. Its about 8" tall curved section and maybe 3' long (1/2 width of car and a slight wrap on lower quarter). THANKS FOR CONSIDERATION.
|
|
dand
New Member
Posts: 20
|
Post by dand on Feb 14, 2016 12:55:41 GMT -5
All, I am still in need of a small body patch panel passenger lower quarter to rear valence area near muffler exit. Builder cut a lower body section for exhaust pipe exit that I desire to remedy with original panel shape. Let me know if you have a small section from a scrapped GT2 body. Thanks dand
|
|
dand
New Member
Posts: 20
|
Post by dand on Aug 18, 2016 17:16:56 GMT -5
ALL, I am still looking for someone with a damaged Gt2 body to secure a small body patch panel. The panel section needed is passenger side from centerline of car at rear bumper line down and around the passenger side rear quarter same dimension. Its about 8" tall curved section and maybe 3' long (1/2 width of car and a slight wrap on lower quarter). THANKS FOR CONSIDERATION.
|
|
|
|
Post by kitcarguy on Aug 19, 2016 5:34:19 GMT -5
Seems to me that after a year of looking you would have just repaired it or had someone repair it.
|
|
dand
New Member
Posts: 20
|
Post by dand on Aug 19, 2016 23:00:00 GMT -5
I agree you would think so; however, I have not had time to finish the body work and primer so still looking for the panel but will repair and primer if I get time this fall before cooler weather. Thanks for viewing.
|
|
|
|
Post by badduck81 on Aug 23, 2016 3:49:03 GMT -5
where are you located?
|
|
|
|
Post by badduck81 on Aug 23, 2016 3:50:16 GMT -5
And I guess, what are you looking to spend? I do have a body that Im cutting into to test fit things Im doing...
|
|
|
|
Post by badduck81 on Aug 23, 2016 3:51:12 GMT -5
btw, Im terrible at checking this page, feel free to email me. Wt.Sawyer@yahoo.com
|
|
dand
New Member
Posts: 20
|
Post by dand on Jan 1, 2018 18:27:02 GMT -5
ALL, I am still looking for someone with a damaged Gt2 body to secure a small body patch panel. The panel section needed is passenger side from center-line of car at rear bumper line down and around the passenger side rear quarter same dimension. Its about 8" tall curved section and maybe 3' long (1/2 width of car and a slight wrap on lower quarter). i have not had opportunity to work on car for a few years now but expect to change that in 2018 and complete project. THANKS FOR CONSIDERATION.
|
|
|
|
Post by glfourniercomcast on Oct 25, 2018 14:57:39 GMT -5
I have a 1979 Bradley GT that if I get enough interest in parts I would part out. Call me at 941-979-7503 ask for George.
|
|
