|
|
Post by mariothemagician on Sept 13, 2013 20:53:19 GMT -5
I am restoring a Bradley GT and I'm having trouble finding the right type of U shaped weather strip for the gull wing sections of the car. Most u shaped strips I've found online say that they fit up to 2mm of thickness. I measured the edges of my bradley and with the vinyl folded over I get 1/2 inch thickness! Anybody have a current link of weather stripping that works and fits correctly for the Bradley? Thank you in advance!  |
|
Zmud
Junior Member
Posts: 57
|
Post by Zmud on Sept 13, 2013 23:49:19 GMT -5
Looks Good  .....I bought all mine through jcwhitney. |
|
|
|
Post by jspbtown on Sept 14, 2013 8:32:43 GMT -5
There used to be a perfect weatherstrip at www.mcmaster.com but it was discontinued. They still have a large selection though. Something there will work. Its a great company with reasonable shipping and its lightening fast. |
|
|
|
Post by mariothemagician on Sept 14, 2013 18:41:18 GMT -5
thank you so much! I'll check both those sites out.
|
|
|
|
Post by pushnfords on Sept 15, 2013 11:28:03 GMT -5
Not sure what style the GT has but for the GTII I'm working on I bought some from Metro Moulded and then some from eBay when I realized I didn't order enough. |
|
|
|
Post by mariothemagician on Sept 16, 2013 7:41:46 GMT -5
Pushnfords I'm not sure?!? I ended up ordering from Mcmaster.com under Adjustable weatherstripping, Stytle 11, 12335A21 . It seems the best fit. My goal is to press this stuff without disrupting the glued down vinyl. I hope I ordered enough!
|
|
|
|
Post by skarekr0w on Sept 25, 2013 1:17:06 GMT -5
And you were using thin on what part of the doors?
|
|
|
|
Post by mariothemagician on Oct 4, 2013 22:38:28 GMT -5
skarekr0w I was looking for something to press into the edges of the side window framing of the car. Something that lips onto the interior. Long story short I found some great stuff at Pepboys for the back window, but nothing that really fits well yet for the side window edges.
|
|
|
|
Post by skarekr0w on Oct 5, 2013 12:14:58 GMT -5
Did you get a new seal for the windshield? What did you go with?
|
|
|
|
Post by mariothemagician on Oct 6, 2013 20:53:13 GMT -5
|
|
|
|
Post by skarekr0w on Oct 6, 2013 22:40:19 GMT -5
Checkered interior, groovy baby! I think something like your rear window seal would work for mine too. Looks good. I actually have a Pep Boys here. I didn't know, I'll have to check them out.
|
|
.....I bought all mine through jcwhitney. 
