syngledad36
Junior Member
MAN I LOVE MY BRADLEY GT 2
Posts: 58
|
Post by syngledad36 on Jun 27, 2013 23:43:00 GMT -5
can i use my old 94 ford ranger fuse harness to rewire my bradley gt 2
|
|
|
|
Post by jspbtown on Jun 28, 2013 8:25:32 GMT -5
If you want it to take forever, and have lots of gremlins then sure.
Get a nice and simple harness from Rebel and do it right and do it once. Wiring is something that most people cut so many corners on. Its a significant reason why people abandon these cars and then sell them to others...who try to do something totally crazy with them, and end up abandoning them and selling them to someone else who trys to cut all the corners and never get the car on the road.
Its a repeating story.
|
|
|
|
Post by Wyn on Jun 28, 2013 8:33:23 GMT -5
I had cut off the relay portion of the VW fuse block because it had the dimmer relay and 3 other relay locations. I used the relay block part with a wiring harness from E-Z Wiring. I re-bundled the harness to route engine wiring to the rear. 3 wires were too short but easily spliced. I don't know if they will do it, but if you order from EZ ask if they can make the engine wires about a foot longer to give a little more room for routing. and make the Solenoid Power (Red), the Coil Positive (Pink), and the IGN Switch Start (Violet) 5 feet longer. I used the EZ 21 package. Wyn  www.ezwiring.com/index.html |
|
