|
|
Post by bradley85 on Jun 12, 2013 18:52:30 GMT -5
The bad news is that these windows are out of production. I bought mine from JC Whitney in late 1994 and they were a replacement for the small 40 percent side door flip-out window on the Chevy and GMC 60/40 vans of that era. Maybe some of those can still be found in junk yards and be made to work. I am going to try to post some photos. If they do not work, I will have to get some help and try later. Greg PS I have been tinkering around with this for 2 or 3 hours and I can only make single posts. I tried Wyn's suggestion and it did not work, so if anyone has the key, please let me know. Attachments:
|
|
|
|
Post by Dan MacMillan on Jun 12, 2013 19:58:27 GMT -5
At the bottom of every thread there is a message window. Do not write anything in it and just click on post reply. In the window that opens you will see another message box you can write in. Above it are a bunch of small icons. If you hover your mouse over them it will tell you what each is for.
Now to post pics. They must be hosted on a site anywhere on the net. When you find the pic you want to show. Right click the photo, click on properties, highlight the address/url in it's entirety. It will begin with http and end in jpg. Copy it. Come back to your posting window that I explained above. Paste it into the window then highlight it again. Go to the icons at the top and click the {image icon}. This will put the proper prefix and suffix to the address. Ther must be no spaces between the brackets and the address info. Repeat this as many times as there are photos.
Youtube videos are done the same way, as are quotes etc. after you see the format you can simply type it in as you go. Whatever you find easier.
|
|
|
|
Post by Wyn on Jun 12, 2013 21:10:05 GMT -5
If your pictures did not show you have an error in their web address. To test your picture's web address just copy and paste it to your web browser, if the address is correct the picture will appear. A correct web address will post directly to the internet. If you click on any one of the web addresses below they will open in your web browser out side of this Bradley site. To post them on the Bradley web site they need the image brackets. ( [ img] web-address[/img] ) I had to place a space inside the first set of brackets so my example of the brackets would not activate as an image. www.ksus-62.net/Brad/Misc/post-pic-2p.jpgwww.ksus-62.net/Brad/Misc/Bill_Johnsons-gt2.jpg the top address has the Brackets added and the image is now activated so you now see the image below here on the Bradley site.  |
|
