|
|
Post by jgleneck on Apr 30, 2013 2:59:07 GMT -5
hey, I'm in the process of re-doing the interior and for the side walls i was going to use a thin carpet, any recommendations on what type to use? I saw a couple that had it, but i couldnt tell what kind it is. i like the look, and i think it'd be the cheapest/easiest way to re-do the interior.
|
|
|
|
Post by jspbtown on Apr 30, 2013 10:07:49 GMT -5
|
|
|
|
Post by cocacoladodge on Apr 30, 2013 10:11:28 GMT -5
Nice location for the radio, too bad the B-GT isn't that user friendly, I have to pull my seats in order to do that...
|
|
Eric A
Full Member
It's an obsession not an investment!
Posts: 223
|
Post by Eric A on Apr 30, 2013 11:26:08 GMT -5
Mine came from a boat supply store. Indoor/ outdoor.
|
|
|
|
Post by jspbtown on Apr 30, 2013 11:36:01 GMT -5
I am not sure it was the best place for function, but the Avenger dash is so balanced I didn't want to hack it up. It was the only place really left in the custom center console.  The Bradley I built game with a nice little under dash part that would hold a radio.  |
|
|
|
Post by trimagnum on May 2, 2013 4:33:56 GMT -5
Menards carries some automotive carpet it forms pretty well and seems to hold up ok as well.  |
|
|
|
Post by smyrnaguy on May 3, 2013 9:12:38 GMT -5
I acquired a 60ft roll of black 4ft wide carpet runner that was surplus from the US Senate office building. Its short pile, dense weave and made for high traffic. I made patterns from paper, cut the carpet and bound the edges to prevent fraying. Jsbtown I hope that radio has a remote control or you'll need ape arms to change stations while driving. That Avenger is a sweet ride! I didn't much care for the original dash in my GT so I cut it out and made one that puts the instruments in front of the driver, the radio/monitor in the center and a real glovebox in front of the passenger. AC controls are under the radio.
|
|
|
|
Post by jspbtown on May 3, 2013 11:14:59 GMT -5
It did have a remote thank goodness.
|
|
