Post by skip20 on Apr 9, 2013 12:25:42 GMT -5
But the BIG NEWS is I found a CURE for the GTII BUTT SNAG!!!!!!!! For $65.00 plus your tax, a little hammering & welding, FIXED.
The cage comes welded & tubes which slide into it.
The shock mounts tube need to be hammered over about 45.
The Trans mount tubes bolt to the two large bolts on the Trans cross over, need BIG socket.
BUT, the engine should be OUT to do this. Also the engine needs to be in before you reinstall it after welding the four tube.
With it together, rubber hammer it to were you want to to sit.
Tick weld the remove for welding.
You may be able to see that the cage sits with the plywood inner fenders.
Use 2" or 3" bar stock & drill two holes into it, these will bolt though the plywood. Being sure the body is now straight, weld the bar stock to the tubing of the cage.
Will be adding picture as I do it.
