|
|
Post by rizzo81 on Jan 11, 2013 7:26:10 GMT -5
Does the gt2 have a place for reverse lights? How has everyone done theirs? I need them so i can pass inspection in ky. Thanks for your help!
|
|
|
|
Post by horen2tas on Jan 11, 2013 9:17:36 GMT -5
some put them on the bumpers (if you have them) others mount them like this:  or pretty much any way or anywhere you you'd like as long as they are on the back of the car. Obviously there must be regs against putting them on the roof, there's probably a ton of options when it comes to style, pretty much anything you find that you like. The junk yards got to be full of them at bargain prices. I saw someone use the BU lights from a Hudson Hornet and they were way cool. |
|
|
|
Post by jspbtown on Jan 11, 2013 9:32:04 GMT -5
Wiring is super easy. Most people run fused power from the + side of the coil to the back up switch on the tranny and then from the switch to the lights. You of course will need a good ground as well. Small white lights can be bought just about anywhere. I got some motorcycle turn lamps for my old Avenger. On My old Kelmark I used small white lights and black rubber grommets from my local NAPA.   |
|
rb
New Member
Posts: 28
|
Post by rb on Jan 11, 2013 9:59:32 GMT -5
Horen That exhaust looks great. Where did you get it?
How does it sound? Thanks RB
|
|
|
|
Post by rizzo81 on Jan 11, 2013 10:56:16 GMT -5
Thank you so much horen!
|
|
|
|
Post by horen2tas on Jan 11, 2013 11:22:55 GMT -5
Don't want to Hi-Jack this thread see"custom exhaust" thread for the answer
|
|
zaucy
Full Member
Posts: 127
|
Post by zaucy on Jan 11, 2013 13:31:19 GMT -5
Where exactly is the reverse gear switch on the tranny?
|
|
rb
New Member
Posts: 28
|
Post by rb on Jan 11, 2013 13:37:42 GMT -5
Thank You
|
|
|
|
Post by Dan MacMillan on Jan 11, 2013 16:10:10 GMT -5
Where exactly is the reverse gear switch on the tranny? Only later trannys have one. It is at the front of the trans next to the shift selector, black item in pic  |
|
