|
|
Post by shyrina1 on Feb 5, 2012 2:37:57 GMT -5
Anyone out there know what dual headlight assembly is on the GT. I have both of my covers and one side is complete with the headlights but one side is missing the whole interior assembly, lights, brackets etc?
|
|
|
|
Post by cocacoladodge on Feb 7, 2012 16:24:48 GMT -5
I came across a Jaguar in m local salvage yard (first time I saw anything that high$$$ there) and it had the same size lights as the Bradley (about 5 3/4" diameter) so i got those and the mounting plate. I have seen quite a few older cars from the 60's and 70's with the same size in a dual light setup, any of those should work. I'm not saying you have to track down old parts or N.O.S. parts, thats just an option. I have found the bucket/ leveling/ and trim rings on ebay quite often. Right now, I'm looking into changing the hallogen bulbs over to HID units with colored HALO lit trim rings. Like one of the other members signatures says, You are only limited to what your imagination is capable of imagining.
|
|
|
|
Post by Dan MacMillan on Feb 7, 2012 21:41:42 GMT -5
Any car from the 70's that had the 4 headlight system will fit. You need the high beam pots/bulbs and retaining rings. However you will have to find some sort of trim ring that fits.
|
|
|
|
Post by Wyn on Feb 7, 2012 21:57:51 GMT -5
I am not sure what you are looking for. It sounds like the whole headlight box and all parts are missing or is it
the panel the head lights mount on is missing.
Headlight rings and mounts can be purchase at your local auto parts store for any headlight assembly.
Unless someone has the other parts needed and will sell them, you will need to make them yourself
or machine shop make them for you of they are metal.
Any fiberglass parts you can make them yourself. Cardboard and Saran wrap is all you need to make a mold.
Just use the light assembly you have for a pattern for what you need.
Post some pictures.
Wyn
|
|
