|
|
Post by kitcarguy on Dec 5, 2011 21:11:59 GMT -5
Hey Everyone, Before I go and start making these graphics I want to offer a set to one lucky member for testing  I only ask that the member is at a stage of their build where they are ready to put a graphic on the car and that they report back and let us know how it looks with a photo. I have the following colors available Gold Silver White Green (Kelly Green) Yellow Red Purple Pink Royal Blue Black (coming this week) Post here if you are interested, and I will get your info. Thanks  |
|
|
|
Post by kitcarguy on Dec 7, 2011 12:58:08 GMT -5
I am surprised nobody is taking me up on this offer. Maybe it is because nobody has a finished bradley..haha Here is my set fresh off the cutter  |
|
|
|
Post by Dan MacMillan on Dec 7, 2011 20:31:32 GMT -5
I would if it said Bradley GT2e. Can you post a photo of the different colors?
|
|
larry
New Member
Posts: 18
|
Post by larry on Dec 7, 2011 21:11:27 GMT -5
Here is what the GTE Decal looks like. Attachments:
|
|
|
|
Post by kitcarguy on Dec 7, 2011 22:09:27 GMT -5
Hey Dan, I will get a photo the colors shortly.Did you have any color in mind you where interested in? Also I can make the GTE graphic. It is the same font as the other.  |
|
|
|
Post by Dan MacMillan on Dec 7, 2011 22:50:34 GMT -5
Like I said
BRADLEY GT2e same as your GT decal. I do not care fore the proper GTII Electric wording. The "e" is for experimental.
I am thinking white as it will contrast well with any color. Wording about 4 inches from rear wheel opening, not under door.
|
|
|
|
Post by kitcarguy on Dec 8, 2011 8:32:19 GMT -5
So you would want to see the graphic run the entire length of the car like the GT, but with the graphic going across the door instead of below it?
|
|
|
|
Post by Dan MacMillan on Dec 8, 2011 9:48:45 GMT -5
Wheel well to wheel well under the door with the lettering behind the door. Got a funeral to go to now. Will post a pic later today.
|
|
|
|
Post by richardevers on Dec 8, 2011 12:12:50 GMT -5
im interested,
Thanks, Rick From Mississippi
|
|
|
|
Post by kitcarguy on Dec 8, 2011 17:02:11 GMT -5
I got what you want Dan. let me make a mockup
|
|
|
|
Post by kitcarguy on Dec 8, 2011 17:30:10 GMT -5
|
|
|
|
Post by Dan MacMillan on Dec 9, 2011 8:50:45 GMT -5
Yes, however a little more stripe between the graphic and the rear wheel opening.
|
|
|
|
Post by kitcarguy on Dec 13, 2011 19:56:55 GMT -5
I did not forget about anyone. This is my last week of the year at the racetrack and a ton to get done |
|
|
|
Post by richardevers on Dec 14, 2011 12:35:21 GMT -5
Thanks, Please keep me in mind
|
|
jimgt
New Member
Posts: 20
|
Post by jimgt on Dec 26, 2011 21:06:49 GMT -5
Hi Kitcarguy, I am interested in your Bradley GT side graphics. I've been working on my GT for about 2 years. Its almost done! It royal metallic blue. I think the black side graphics would look good. Please let me know the cost and how to go about getting them. Thanks jimgt Attachments:
|
|
|
|
Post by kitcarguy on Dec 26, 2011 22:18:39 GMT -5
I am going to put my set on the car tomorrow and make sure everything goes well. I am going to cut out the GTe set for Dan now and mask it tomorrow at the office.
Jim I have not really given much thought to the price, but there is no reason I could not do it for around $40 a set plus whatever the actual shipping costs are.
|
|
|
|
Post by kitcarguy on Dec 26, 2011 22:35:40 GMT -5
Hey Dan,
Before I cut this do you think 12" from the wheel well is enough at the back wheel? Also would 80" total from end to end be more than enough?
|
|
jimgt
New Member
Posts: 20
|
Post by jimgt on Dec 26, 2011 22:44:15 GMT -5
I would like a set of your Bradley GT side graphics
E-mail me an we can work out the details.
My E-mail is jdg-rcflyer@comcast.net
jim
|
|
|
|
Post by kitcarguy on Dec 26, 2011 22:58:30 GMT -5
|
|
|
|
Post by Dan MacMillan on Dec 27, 2011 22:52:28 GMT -5
I will measure it in the morning
|
|
|
|
Post by Dan MacMillan on Dec 28, 2011 23:42:00 GMT -5
Hey Dan, Before I cut this do you think 12" from the wheel well is enough at the back wheel? Also would 80" total from end to end be more than enough? 80" is great, 9 inches from the wheel well would be better. White please. Thanks |
|
|
|
Post by kitcarguy on Dec 31, 2011 21:13:26 GMT -5
Cool Dan I got your and Jims cut out. Jim I will send you an email shorty.
|
|
|
|
Post by Dan MacMillan on Dec 31, 2011 21:50:53 GMT -5
PM sent
Thank you.
|
|
|
|
Post by kitcarguy on Jan 2, 2012 10:56:43 GMT -5
Photos for you Dan. What do you think?   |
|
jimgt
New Member
Posts: 20
|
Post by jimgt on Jan 2, 2012 20:54:25 GMT -5
Hi Donnie,
I think my side graphics should be white.
This is the way it looks in some old sales literature I found.
Thanks
Jim
|
|
|
|
Post by kitcarguy on Jan 2, 2012 22:05:49 GMT -5
I can do them in White Jim. No problem. Sorry I have not emailed you I have just been busy. You will see an email from me in the morning.
Thanks
|
|
|
|
Post by Dan MacMillan on Jan 3, 2012 8:13:07 GMT -5
Looks great, Thank you.
|
|
|
|
Post by cocacoladodge on Jan 5, 2012 5:25:46 GMT -5
Can you make up some graphics of the Griffin with the B Crest? My headlight covers are loosing their luster in the center (still metalflake silver), and I was going to have them redone however, I thought it would be cool to have the griffins on them instead. If you can, I would like one facing left and the other facing right (so they both are facing the center) and large enough to cover at least half of the headlight cover. with it being enlarged so much from the normal size, it would be fine with me if you made some changes to it to add a little more detail and flare to it.
Also since I'm asking, what are the odds of having a stripe that runs from the front of the wheel well, across the front of the nose, to the other wheel well made up? the same car has some type of lace pattern on it in this location right now, and the decal is peeling and not looking so great. Thats not to say that I don't like the lace look, it just looks out of place with the solid stripe on the main section.
I'll take some pictures and send to you sometime soon so you can see what I mean.
-Bob
|
|
|
|
Post by kitcarguy on Jan 5, 2012 19:24:36 GMT -5
Hey Bob, I have cut out the crest before. They are really simple. I just need to know what size you need them. As far as the other goes feel free to post a few photos so I can see what you are talking about. Thanks  |
|
|
|
Post by cyaneyes on Jan 6, 2012 21:16:23 GMT -5
I am interested in some flat black decals.I am obout 3 weeks away from painting.what would they cost and was looking for the the side badges too.
|
|
I only ask that the member is at a stage of their build where they are ready to put a graphic on the car and that they report back and let us know how it looks with a photo. 
