Eric A
Full Member
It's an obsession not an investment!
Posts: 223
|
Post by Eric A on Mar 13, 2013 18:59:56 GMT -5
Nope I had them made at a local sign shop
|
|
Eric A
Full Member
It's an obsession not an investment!
Posts: 223
|
Post by Eric A on Mar 12, 2013 21:08:11 GMT -5
Mine are cut off from full doors. The full doors are one piece also without a hinge to the best of my knowledge. I have never seen a hinge on either kind. You might need full doors. I live in south fl also and the rain can get pretty bad! Eric
|
|
Eric A
Full Member
It's an obsession not an investment!
Posts: 223
|
Post by Eric A on Mar 12, 2013 19:27:29 GMT -5
Hopefully this works.
|
|
Eric A
Full Member
It's an obsession not an investment!
Posts: 223
|
Post by Eric A on Mar 11, 2013 20:59:53 GMT -5
Yes I can tomorrow. Mine were full doors that I made half gulls. Eric
|
|
Eric A
Full Member
It's an obsession not an investment!
Posts: 223
|
Post by Eric A on Mar 11, 2013 12:56:12 GMT -5
I have half gulls on mine. I live in south Florida and they are perfect. Full doors are useless unless you have A/C. It is like driving an oven! The halfs keep the sun off and allow good air flow and fairly good rain protection. Eric
|
|
Eric A
Full Member
It's an obsession not an investment!
Posts: 223
|
Post by Eric A on Mar 5, 2013 14:06:56 GMT -5
I bought a H&K soft air gun for Christmas. It shoots the 6mm bbs. It is co2 and holds 16 rounds. It also has a laser. It is so much fun! My favorite thing to shoot and I can still get ammo for it. Lol
|
|
Eric A
Full Member
It's an obsession not an investment!
Posts: 223
|
Post by Eric A on Feb 28, 2013 19:26:36 GMT -5
not sure what photobucket is but lets try this a different way. I hate ProBoards insert 5 cuss words here! Try number 7.
|
|
Eric A
Full Member
It's an obsession not an investment!
Posts: 223
|
Post by Eric A on Feb 28, 2013 17:16:52 GMT -5
Sorry I am on my phone not sure if you all can see the pic or not.
|
|
Eric A
Full Member
It's an obsession not an investment!
Posts: 223
|
Post by Eric A on Feb 28, 2013 17:15:12 GMT -5
My plate looks nothing like the ones above I have no model number. Attachments:
|
|
Eric A
Full Member
It's an obsession not an investment!
Posts: 223
|
Post by Eric A on Feb 28, 2013 17:09:02 GMT -5
I have paid about $14 a pound for LR here.
|
|
Eric A
Full Member
It's an obsession not an investment!
Posts: 223
|
Post by Eric A on Feb 27, 2013 19:01:38 GMT -5
Will you be putting coral in it? I have some live rock but it was cultured in Tampa Bay during a time when there was a dam failure at a phosphate holding pond. So it was all soaked with that water. I had to pull it from my tank it is now in a holding tank with no fish. I am not sure how "live" it still is. I have about 50 pounds I think. But it can Not be used with any coral. As a side note phosphate mining is a horrible thing when done near estuaries. Before the dam break Bishop Harbor was one of my favorite places to kayak. It was full of fish and rays you could see six feet deep. Now after the break I went back and did not see a single live animal not even bugs and visibility was less then an inch. Very disheartening. Eric
|
|
Eric A
Full Member
It's an obsession not an investment!
Posts: 223
|
Post by Eric A on Feb 26, 2013 11:08:55 GMT -5
I am on shift today but I will look tomorrow. I think it is 6XXX but I am not sure.
|
|
Eric A
Full Member
It's an obsession not an investment!
Posts: 223
|
Post by Eric A on Feb 26, 2013 11:07:23 GMT -5
I live on the Gulf of Mexico. I also have two big reef tanks. I use to do water changes with ocean water and it worked but after a while I had to pull all the sand and ocean acquired stuff out because of the level of phosphate. It leaches out of everything! I fought it for six months to finally got it out of the tank. It was coming out of the sand, shells, rocks and water. So just use due caution. This is not a big problem as long as you don't want coral in the tank just fish. Eric
|
|
Eric A
Full Member
It's an obsession not an investment!
Posts: 223
|
Post by Eric A on Feb 25, 2013 21:52:47 GMT -5
Mine is in the engine compartment.
|
|
Eric A
Full Member
It's an obsession not an investment!
Posts: 223
|
Post by Eric A on Jan 7, 2013 17:51:14 GMT -5
Sara, I am so sorry for your loss. I talked to your husband several times and he was always very helpful. Unfortunately I am not much help to finish the cars as I live fairly far from you as I remember but I am sure someone in this group will be able to help you. Eric A
|
|
Eric A
Full Member
It's an obsession not an investment!
Posts: 223
|
Post by Eric A on Oct 11, 2012 7:08:50 GMT -5
It is a Webber progressive 2bbl. I have not rebuilt it ever. I think that my next attempt Thanks, Eric
|
|
Eric A
Full Member
It's an obsession not an investment!
Posts: 223
|
Post by Eric A on Oct 10, 2012 17:06:08 GMT -5
I have posted the issue a few times. The fuel line is clear of all heat sources. I have tried starter fluid and no go which leads me to think it might be an electrical issue. I do not have a baffle between top and bottom. The odd thing is that for 30K miles with the same exact configuration there was never an issue. I have replaced the coil and the dist. Cap, rotor and plugs. It sounds like it has good compression when it won't start. It sounds like there is no fire. Eric
|
|
Eric A
Full Member
It's an obsession not an investment!
Posts: 223
|
Post by Eric A on Oct 10, 2012 9:30:02 GMT -5
Yes it does have an oversized cooler. The motor does not over heat. I have had two places look at it with no success. It will run perfect and usually will run a long time but as soon as you shut it off it will not restart. As soon as it cools down for an hour or so to outside temp it starts right back up and runs fine. Very frustrating! Eric
|
|
Eric A
Full Member
It's an obsession not an investment!
Posts: 223
|
Post by Eric A on Sept 27, 2012 19:11:25 GMT -5
I have a 17?? Something. My problem is when it comes up on temp it quits running and will not restart till it cools down. I have tried everything.
|
|
Eric A
Full Member
It's an obsession not an investment!
Posts: 223
|
Post by Eric A on Sept 23, 2012 13:45:53 GMT -5
It needs some brake work and it has an ongoing motor problem.
|
|
Eric A
Full Member
It's an obsession not an investment!
Posts: 223
|
Post by Eric A on Sept 22, 2012 22:32:39 GMT -5
I live in Venice but mine needs some work before it hits the road. Eric
|
|
Eric A
Full Member
It's an obsession not an investment!
Posts: 223
|
Post by Eric A on Jul 30, 2012 10:36:58 GMT -5
Me too. But I am in fl
|
|
Eric A
Full Member
It's an obsession not an investment!
Posts: 223
|
Post by Eric A on Jul 27, 2012 15:51:36 GMT -5
I think the file is on my site at bradleygt.org Eric
|
|
Eric A
Full Member
It's an obsession not an investment!
Posts: 223
|
Post by Eric A on Jul 27, 2012 15:50:29 GMT -5
I had my heli sent back to horizon and they sent it back "fixed" but still no one could fly it. I tore it down completely in a last ditch effort and learned the awash plate had separated. I replaced it and it flies perfect! Then I got an SR120 and a new spektrum 6xi radio and both heli's fly perfect! Eric
|
|
Eric A
Full Member
It's an obsession not an investment!
Posts: 223
|
Post by Eric A on Jul 15, 2012 15:23:58 GMT -5
None from me! Eric A.
|
|
Eric A
Full Member
It's an obsession not an investment!
Posts: 223
|
Post by Eric A on Jul 15, 2012 15:22:49 GMT -5
It really sounds like a ground problem. You should have a power, ground, and sending unit. Either you have a bad gauge or you have a bad ground. Eric
|
|
Eric A
Full Member
It's an obsession not an investment!
Posts: 223
|
Post by Eric A on Jul 2, 2012 7:48:41 GMT -5
That is awesome! I have never seen one. I want one buy does it come in mph? Eric A
|
|
Eric A
Full Member
It's an obsession not an investment!
Posts: 223
|
Post by Eric A on Apr 17, 2012 22:00:19 GMT -5
Hagerty. I pay $95 a year unlimited mileage. No hassle at all with it being a kit car. Very friendly and helpful. Eric A.
|
|
Eric A
Full Member
It's an obsession not an investment!
Posts: 223
|
Post by Eric A on Feb 29, 2012 17:28:52 GMT -5
I do have a little 4ch one also and I love it. My kids can fly it and it is very stable. My kids and I love to try to land it on the pad in our Lego city.
|
|
Eric A
Full Member
It's an obsession not an investment!
Posts: 223
|
Post by Eric A on Feb 27, 2012 23:42:51 GMT -5
Well after a trip to service for my cx3 heli it came back still messed up. But they did send me a brand new MX 120 and let me keep the CX3. I was not really able to fly the new one either but after a complete tear down on the CX3 I found it had a swash plate that would bind and come apart. I replaced it and it flies perfect. I then bought a new Spektrum 6 channel radio and bound it to both Heli's and now I can fly either without issue. So between a bad part and a cheap radio I went thru hell but came out of it with 2 fun to fly heli's. I can't wait to get enough time on them to get a bigger one. Eric
|
|