|
|
Post by David Chapman on May 10, 2011 19:49:01 GMT -5
My GT1 keeps clogging up the fuel filters and fuel pump due to an old tank, does anyone make them?
|
|
|
|
Post by kartracer on May 10, 2011 20:02:41 GMT -5
|
|
|
|
Post by smyrnaguy on May 11, 2011 9:03:16 GMT -5
You might try cleaning it out and coating the inside with POR 15 tank sealer. Remove the tank. Remove the sending unit from the tank. Drop a 10' chain or a couple of handfuls of clean nuts and bolts into the tank and shake back and forth, up and down, on this side then that etc. Remove the chains or hardware and blow the tank out with air. I can't remember but I think the POR15 treatment asks you to rinse the tank out with water before application. The tank treatment is easy. Just pour in a quart of the stuff and swish it around while turning from side to side. Pour out any excess, dry overnight and reassemble.
|
|
