|
Post by darrenz on Apr 8, 2011 22:58:06 GMT -5
My ammeter only flickers when cranking once running mainly stays just near zero.put a meter at battery and stays at 12v.warning light doesn't light while running.generator is newer and I just replaced and polarized regulator with no luck.I also did generator by itself test and had about 16v at idle. Any ideas?thanks
|
|
|
Post by jspbtown on Apr 9, 2011 12:49:19 GMT -5
How is your ammeter wired? Does the warning light come on and then go off?
|
|
|
Post by darrenz on Apr 9, 2011 13:51:15 GMT -5
Fixed. Was not get proper ground to generator case.was a weird one put volt meter to b+ and gen case and read 12v but when touchig a wire from b+ toside of gen there was no spark but touch to engine was. Grounded gen to batt. Works perfect.
|
|