|
Post by winger32 on Jun 13, 2016 12:15:21 GMT -5
I have two back windows 2drivers in good shape 2 passengers one cracked I think I have an extra one somewhere but don't know for sure
|
|
|
Post by winger32 on Jun 5, 2016 12:12:50 GMT -5
Hi guys it's been a long time I am trying to sell everything vdub related I have one complete gt with title just needs a motor. Then I have another body and pan that I was fixing . The engine on this runs! I also have about 4 spare motors 3 trans and a bunch of odds and ends if you would like to know more message me.
|
|
|
Post by winger32 on Jun 30, 2015 2:31:35 GMT -5
How much are you looking to get?
|
|
|
Post by winger32 on Mar 15, 2015 22:51:35 GMT -5
I seen the supercharged engine, was thinking it would be Easier but I was wondering were I could get one, because I have a square hole cut right above carb and was thinking that if I did something like that the carb would fit right out the hole
|
|
|
Post by winger32 on Feb 11, 2015 22:27:12 GMT -5
So for my second gt me and my buddy decided we were gunna turbo it. I bought a turbo from an 80's 3.8l and it came with the intake so were comtemplating on putting a 4brl on it or not. Also were gunna put a big cam in it. Anyways just a built vw motor gets up and goes so i figuerd with the low weight that it should really fly!(also theres a vw guy in my town and he has a long block with twin carbs and i just want to smoke him) Ill post some pics when we sart fabing. Any thoughts or more importantly issues forseen just drop'em below
|
|
|
Post by winger32 on Feb 7, 2015 12:48:21 GMT -5
On the Facebook page one of the users had a picture of a printed article that states the windshields for both were from a 63-67 corvette coupe! Any thoughts or has someon tried it/ the outcome
|
|
|
Post by winger32 on Nov 18, 2014 23:38:08 GMT -5
It no work
|
|
|
Post by winger32 on Nov 18, 2014 23:37:41 GMT -5
Wrong face ?
|
|
|
Post by winger32 on Nov 18, 2014 23:37:13 GMT -5
You'z is funny ?
|
|
|
Post by winger32 on Sept 29, 2014 19:34:42 GMT -5
I seen that too ill send him a message tomorrow
|
|
|
Post by winger32 on Jul 24, 2014 12:26:27 GMT -5
Well thanks for the input guys I went to fleet farm and they have stainless carriage bolt I looked I only need two I just thuogt maybe I could get some to match any way does anybody have an idea of how much a. Windsheild would cost
|
|
|
Post by winger32 on Jul 22, 2014 22:19:10 GMT -5
I'll talk to fastelall and c if they got anything but it's not absoluty necessary I just think they bring the look together and the windsheild I need is a early 60's Vette or a 63/67 pickup
|
|
|
Post by winger32 on Jul 22, 2014 8:42:31 GMT -5
Wat about like ppg? And wat about the chrome button like bolts at the base connecting the top to the body. Where can I get those ?
|
|
|
Post by winger32 on Jul 21, 2014 9:46:11 GMT -5
I'm lookin for a windsheild for a gt1 and if possible the trim Around it, Thank you!
|
|
|
Gt #2
Jul 19, 2014 8:51:16 GMT -5
via mobile
Post by winger32 on Jul 19, 2014 8:51:16 GMT -5
Well I decided I need another project. I picked up a gt1 in Milwaukee. It's a 1300cc it needs a new windsheild and a fuel pump other than that it's drive able I gotta put the top back on cuZ they didn't support the windsheild and because I think it looks stupid. Picks will be up soon
|
|
|
Post by winger32 on Jun 16, 2014 1:14:58 GMT -5
Mj you may be onto somethig with the plexi but side scoops like such wig the hose are for race cars and the hose is a fresh air supply to the drivers helmet maybe you could do somethig like tht and tie it into the duct work?!?!
|
|
|
Post by winger32 on May 24, 2014 13:48:37 GMT -5
Well I got some more parts picked up two engines an extra tranny, and some pedals. I am gunna redo one of the engines, it's a dual port with an internal oil cooler. I picked up a set of heads setup for dual carbs and am gunna put those on. For now I'm gunna just run what I got when I get that far. Was wondering if I can have a master cylinder rebuilt or do I gotta get a new one, I have four three have two rubber boots and one has three
|
|
|
Post by winger32 on Apr 19, 2014 15:31:23 GMT -5
I seen that and I think I might do that
|
|
|
Post by winger32 on Apr 19, 2014 14:17:56 GMT -5
I was thinking about a body lift instead and or seat mounts like big bird.
|
|
|
Post by winger32 on Apr 14, 2014 13:12:23 GMT -5
Well I got a new pan for my bradley was stored for like 30 years almost perfect! It's like a 1970 and the length of the torsion bar is different so I'm gunna use the one that I have so I gotta weld the rear end on the new pan and getting an extra motor also
|
|
|
Post by winger32 on Mar 30, 2014 20:03:40 GMT -5
My internets being slow so no pictures but I got the body completely off the pan and rolled the pan out . Motor and tranny don't look too bad but floors are gone I'm gunna need to replace them or make some new ones. Also I need to fix the pedals. !!!!! I recently contacted a guy who owns a Bradley, turns out he lives 10 mins away!!! Gunna meet up this spring. Kinda excited I'm not the only one. And Jeffrey I live halfway between Wausau and antigo!
|
|
|
Post by winger32 on Mar 30, 2014 3:12:30 GMT -5
Call or text me 715-581-1673
|
|
|
Post by winger32 on Mar 30, 2014 3:08:41 GMT -5
Iam in antigo just wondering if there's and bradley owners in Wausau wi?? I am from halfway between wausau and Antigo. Town of Hewitt
|
|
|
Post by winger32 on Mar 30, 2014 3:03:15 GMT -5
Well it's been awhile!!!! Cough(understatement) But I got the body lifted completely off the pan about 12-14 inches. Just me and Grampa! I haven't started removing wires yet but I looked real food and I only see about a dozen wires here and there mainly by the motor .
Will have pics on my google site soon
|
|
|
Vw trike
Feb 10, 2014 16:11:19 GMT -5
via mobile
Post by winger32 on Feb 10, 2014 16:11:19 GMT -5
|
|
|
Post by winger32 on Jan 23, 2014 9:54:30 GMT -5
is there a windshield between the two of them?
|
|
|
Post by winger32 on Jan 10, 2014 13:51:36 GMT -5
thanks for the input I looked in back by the motor and its all just wires and like here and there so its gunna be a challenge and it there an easy way to pick the body off the frame or is it just get a good hold and lift?.... cuz its me and my grampa and grampas pretty old with knee problems
|
|
|
Post by winger32 on Jan 10, 2014 9:51:52 GMT -5
Wausau is in central Wisconsin smackdab in the middle
|
|
|
Post by winger32 on Jan 10, 2014 9:22:26 GMT -5
I got it apart last night after a couple busted knuckels and a few choice words lol but its apart and I lifted the body some, got some blocks under it. now I can take it off but ik these cars are all different(no two are the same) but is there any key places that I should check for wires or anything connected to the body?
|
|
|
Post by winger32 on Jan 10, 2014 9:16:50 GMT -5
central, wausau
|
|